Skip to content

Silicone instead of glue

MP Gecko Mix Freeride 110/180

A skin with no glue: the underside is silicone and it holds by suction.

MP Gecko Mix Freeride climbing skin with silicone underside

MP Gecko Mix Freeride 110/180

A skin with no glue: the underside is silicone and it holds by suction.

Fits
Any ski; width and length are chosen when ordering, and the edges are trimmed with the supplied knife
Fibre
Mohair on the top face, pre-impregnated
Width
110 mm
Length
180 cm
Tip attachment
Pre-fitted front holding system
Tail attachment
Rear holding system, with rivets supplied
Adhesive
None — silicone underside holding by suction
Trimming tool
Yes — the Gecko knife, with 2 mm of edge to leave free
Amazon reference
B0DHZN9L6V (one reference across 6 Amazon marketplaces)
EAN
9120057622459
  • No glue at all: nothing to transfer to the base, nothing to renew with an iron, and no separating sheet to carry
  • The trimming margin is published — leave 2 mm of edge free — which no other listing here specifies
  • Silicone needs a clean, dry base to grip; the listing makes no claim about a wet or waxed one

Best for: A tourer tired of glue, folding sheets and iron-on renewal

≈ £118 / €125
Check price on Amazon

Specifications

Fits
Any ski; width and length are chosen when ordering, and the edges are trimmed with the supplied knife
Fibre
Mohair on the top face, pre-impregnated
Width
110 mm
Length
180 cm
Tip attachment
Pre-fitted front holding system
Tail attachment
Rear holding system, with rivets supplied
Adhesive
None — silicone underside holding by suction
Trimming tool
Yes — the Gecko knife, with 2 mm of edge to leave free
Amazon reference
B0DHZN9L6V (one reference across 6 Amazon marketplaces)
EAN
9120057622459

No glue

Das Gecko Tourenfell ist das einzige Steigfell, das ohne Kleber auskommt. Das Silikon haftet durch Saugkraft am Ski.

The underside is silicone. It holds by suction, and a holding system fixes the tip and the tail.

Every other skin on this shelf argues about adhesive — hot-melt, Pomoca, Smart Glue. This one removes the argument, and with it the folding sheet, the iron and the glue left on the base.

The trimming

The Gecko knife is in the box, and the listing gives the margin: 2 mm of edge free on each side.

The family page above says a skin is the only product on this site that has to be cut to the ski it will live on. This is the listing that tells you how far to cut.

The fibre

Mohair, pre-impregnated, stated to resist snow balling up underneath and to give the best mix of grip and glide.

No percentage. Three skins on this shelf publish one.

What “Mix” means in the name

The listing does not say. On this shelf Mix usually marks a mohair-and-synthetic blend, and the two skins that use the word are the two that publish no proportion.

The price across four stores

118.49 in Britain. 125.00 in Germany. 130.00 in France and Italy. The American and Spanish stores list it and quoted nothing.

Availability

One check, 125 € at the bottom and 130 € at the top, across the German, French and Italian Amazon shops.

Outside the euro, the British Amazon shop sells it in its own currency, and the range above is kept clear of that.

On the shelf, off the market: the American and Spanish Amazon shops carry the reference with no seller attached to it.

Figures pulled from Keepa the day this page was last revised. Stock and prices move without notice.

Prices quoted in this text were read on 28 September 2026. The live price is at the top of the page.

More climbing skins

  • Blizzard Zero G84 orange climbing skin

    Blizzard Zero G84, 178–185 cm

    The only skin here made for one named ski, and the only one built on Pomoca glue.

    Fits
    The Blizzard G084 Approach ski, stated; 178 to 185 cm
    Fibre
    70 % mohair, 30 % synthetic
    Width
    Not published as a figure; the model is named for an 84 mm ski
    Length
    178 to 185 cm
    Tip attachment
    Zero G tip fixing
    Tail attachment
    Universal tail clip on an elastic band
    Adhesive
    Pomoca formula, stated easy to handle
    Trimming tool
    Not published; the skin is stated to be cut to fit the ski
    Amazon reference
    B09KW8ZGV1 (one reference across 6 Amazon marketplaces)
    EAN
    8050459907346
    • Made for a named ski, so nothing has to be measured or trimmed at the sides
    • Names the glue maker — Pomoca — and the membrane, Safer Skin Light
    • The ski it is cut for, the Blizzard G084 Approach, is not on this site

    Best for: An owner of the Blizzard Zero G 084 Approach, and nobody else

    ≈ £169 / €152
    Check price on Amazon
  • Colltex Tödi Crystal 120 climbing skin

    Colltex Tödi Crystal 120, 160–170 cm

    A 120 mm skin for a 160 to 170 cm ski, and the listing says nothing else whatsoever.

    Fits
    Skis of 160 to 170 cm, from the title
    Fibre
    Not published
    Width
    120 mm, from the model name
    Length
    160 to 170 cm
    Tip attachment
    Not published
    Tail attachment
    Not published
    Adhesive
    Not published
    Trimming tool
    Not published
    Amazon reference
    B0BMKRDM2Q (one reference across 5 Amazon marketplaces)
    EAN
    7611818135209
    • A width and a length range in the title, which is the minimum a skin buyer needs to filter
    • A published reference, CT-3120TC-160-170cm, that encodes both figures
    • No characteristics published: six of the eight lines this site compares are blank

    Best for: A buyer replacing a Colltex they already know the behaviour of

    ≈ £157 / €176
    Check price on Amazon
  • Fischer Transalp 88 yellow climbing skin, 163 cm

    Fischer Transalp 88, 163 cm

    The most completely specified skin on the shelf — down to the 12 kg rating of the band that holds the tail.

    Fits
    Skis of 163 cm; the name carries an 88 mm waist
    Fibre
    70 % mohair, 30 % synthetic, woven for glide, with a cotton-polyester backing
    Width
    Not published as a figure; the model is named for an 88 mm ski
    Length
    163 cm
    Tip attachment
    Exchangeable front fixing, with a stainless steel bow
    Tail attachment
    Plastic K-Clip end hook, on a band rated to a maximum of 12 kg
    Adhesive
    Solvent-free hot-melt glue, described as Smart Adhesion, stated consistent across temperature ranges
    Trimming tool
    Not published
    Amazon reference
    B09G1Y1XSP (one reference across 6 Amazon marketplaces)
    EAN
    9002972279201
    • Publishes a working temperature — down to −30 °C — which nothing else on this shelf does
    • Publishes a load rating for the tail band: a maximum of 12 kg
    • No trimming tool mentioned, on a skin sold to a named ski length

    Best for: A 163 cm touring ski of around 88 mm at the waist

    ≈ €175
    Check price on Amazon

The rest of this shelf

  • ALPINA Q-Lite replacement ski goggle lens

    ALPINA A728490124090101

    A Q-Lite lens for one ALPINA frame, with no description at all and a title that never closes its bracket.

    Fits
    The ALPINA goggle, article A7284901, from the title
    Filter category
    Not published
    Lens construction
    Not published; the lens technology is named Q-Lite
    Fitting system
    Not published
    Photochromic
    Not published
    Coatings
    Not published
    Case included
    Not published
    Amazon reference
    B0CN1Q71HR (one reference across 1 Amazon marketplace)
    EAN
    4003692308146
    • The frame is identified by its article number, A7284901
    • Q-Lite is the same contrast technology ALPINA fits to the goggle this site compares
    • No characteristics published at all

    Best for: An owner of the ALPINA goggle A7284901, ordering in Germany

    ≈ €35
    Check price on Amazon
  • ATOMIC Visor ID Stereo replacement visor lens in pink and blue

    ATOMIC AN5005838S

    Not a goggle lens: a replacement visor for a helmet, and it is sold in centimetres of head.

    Fits
    An ATOMIC visor helmet; the listing gives a head size of 51/55 cm rather than a frame name
    Filter category
    Not published
    Lens construction
    Not published; the Stereo screen is a nine-layer mirror on the maker’s helmets
    Fitting system
    Not published
    Photochromic
    Not published
    Coatings
    Not published
    Case included
    Not published
    Amazon reference
    B0B6BT56XC (one reference across 6 Amazon marketplaces)
    EAN
    0887445199427
    • A published reference, AN5005838S, which is what identifies a visor to the maker
    • The Stereo name links it to the visor helmets ATOMIC sells, including one on this site
    • It is a helmet visor on a shelf of goggle lenses, and nothing in the listing says which helmet

    Best for: An owner of an ATOMIC visor helmet in the 51/55 cm size who has cross-checked the reference

    ≈ £62 / €67
    Check price on Amazon
  • Black Crevice replacement ski goggle lens

    Black Crevice BCR261547-13

    A double lens for one named frame, with the change system mentioned and nothing measured.

    Fits
    The Black Crevice goggle model BCR261547, stated
    Filter category
    Not published
    Lens construction
    Double lens
    Fitting system
    Stated to be a simple change system; the mechanism is not described
    Photochromic
    Not published
    Coatings
    Anti-fog
    Case included
    Not published
    Amazon reference
    B015MTVCI2 (one reference across 6 Amazon marketplaces)
    EAN
    9120062933304
    • Names the frame by its article number — BCR261547 — which is unambiguous
    • A double lens, stated, which two of the seven spares here are not
    • Three bullet points, none of which contains a figure

    Best for: An owner of the Black Crevice BCR261547 goggle

    ≈ $58 / £33 / €35
    Check price on Amazon

All climbing skins